diff mbox

[dpdk-dev,v2] doc/guides: add more info about VT-d/iommu settings

Message ID 1477502611-3097-1-git-send-email-fiona.trahe@intel.com (mailing list archive)
State Accepted, archived
Delegated to: Pablo de Lara Guarch
Headers

Commit Message

Fiona Trahe Oct. 26, 2016, 5:23 p.m. UTC 
  Add more information about VT-d/iommu settings for QAT PMD.
Remove limitation indicating QAT driver is not performance tuned.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
---

v2:
 clarified commit message


 doc/guides/cryptodevs/qat.rst | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

Comments

Arkadiusz Kusztal Nov. 2, 2016, 1 p.m. UTC | #1 
> -----Original Message-----
> From: Trahe, Fiona
> Sent: Wednesday, October 26, 2016 6:24 PM
> To: dev@dpdk.org
> Cc: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>; Trahe, Fiona
> <fiona.trahe@intel.com>; Griffin, John <john.griffin@intel.com>
> Subject: [PATCH v2] doc/guides: add more info about VT-d/iommu settings
> 
> Add more information about VT-d/iommu settings for QAT PMD.
> Remove limitation indicating QAT driver is not performance tuned.
> 
> Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
> ---
> 
> v2:
>  clarified commit message
> 
> 
>  doc/guides/cryptodevs/qat.rst | 7 +++----
>  1 file changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst
> index 70bc2b1..bbe0b12 100644
> --- a/doc/guides/cryptodevs/qat.rst
> +++ b/doc/guides/cryptodevs/qat.rst
> 
> --
> 2.5.0
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Thomas Monjalon Nov. 7, 2016, 9:04 p.m. UTC | #2 
> > Add more information about VT-d/iommu settings for QAT PMD.
> > Remove limitation indicating QAT driver is not performance tuned.
> > 
> > Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
> Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>

Wrapped lines and applied.
diff mbox

Patch

diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst
index 70bc2b1..bbe0b12 100644
--- a/doc/guides/cryptodevs/qat.rst
+++ b/doc/guides/cryptodevs/qat.rst
@@ -77,7 +77,6 @@  Limitations
 * Hash only is not supported except SNOW 3G UIA2 and KASUMI F9.
 * Cipher only is not supported except SNOW 3G UEA2, KASUMI F8 and 3DES.
 * Only supports the session-oriented API implementation (session-less APIs are not supported).
-* Not performance tuned.
 * SNOW 3G (UEA2) and KASUMI (F8) supported only if cipher length, cipher offset fields are byte-aligned.
 * SNOW 3G (UIA2) and KASUMI (F9) supported only if hash length, hash offset fields are byte-aligned.
 * No BSD support as BSD QAT kernel driver not available.
@@ -201,7 +200,7 @@  The steps below assume you are:
 * Running DPDK on a platform with one ``DH895xCC`` device.
 * On a kernel at least version 4.4.
 
-In BIOS ensure that SRIOV is enabled and VT-d is disabled.
+In BIOS ensure that SRIOV is enabled and either a) disable VT-d or b) enable VT-d and set ``"intel_iommu=on iommu=pt"`` in the grub file.
 
 Ensure the QAT driver is loaded on your system, by executing::
 
@@ -260,7 +259,7 @@  The steps below assume you are:
 * Running DPDK on a platform with one ``C62x`` device.
 * On a kernel at least version 4.5.
 
-In BIOS ensure that SRIOV is enabled and VT-d is disabled.
+In BIOS ensure that SRIOV is enabled and either a) disable VT-d or b) enable VT-d and set ``"intel_iommu=on iommu=pt"`` in the grub file.
 
 Ensure the QAT driver is loaded on your system, by executing::
 
@@ -304,7 +303,7 @@  The steps below assume you are:
 * Running DPDK on a platform with one ``C3xxx`` device.
 * On a kernel at least version 4.5.
 
-In BIOS ensure that SRIOV is enabled and VT-d is disabled.
+In BIOS ensure that SRIOV is enabled and either a) disable VT-d or b) enable VT-d and set ``"intel_iommu=on iommu=pt"`` in the grub file.
 
 Ensure the QAT driver is loaded on your system, by executing::