[dpdk-dev,v3] config: remove duplicate configuration information
Commit Message
In order to cleanup the configuration files some and reduce
the number of duplicate configuration information. Add a new
file called common_base which contains just about all of the
configuration lines in one place. Then have the common_bsdapp,
common_linuxapp files include this one file. Then in those OS
specific files add the delta configuration lines.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
---
config/common_base | 519 +++++++++++++++++++++++++++++++++++++++++++++++++
config/common_bsdapp | 436 +----------------------------------------
config/common_linuxapp | 460 +------------------------------------------
3 files changed, 528 insertions(+), 887 deletions(-)
create mode 100644 config/common_base
Comments
2016-03-04 12:11, Keith Wiles:
> In order to cleanup the configuration files some and reduce
> the number of duplicate configuration information. Add a new
> file called common_base which contains just about all of the
> configuration lines in one place. Then have the common_bsdapp,
> common_linuxapp files include this one file. Then in those OS
> specific files add the delta configuration lines.
>
> Signed-off-by: Keith Wiles <keith.wiles@intel.com>
It's also fixing the crypto settings which were mispelled for BSD.
Applied with few cosmetic adjustments, thanks.
On 3/4/2016 10:43 PM, Thomas Monjalon wrote:
> 2016-03-04 12:11, Keith Wiles:
>> In order to cleanup the configuration files some and reduce
>> the number of duplicate configuration information. Add a new
>> file called common_base which contains just about all of the
>> configuration lines in one place. Then have the common_bsdapp,
>> common_linuxapp files include this one file. Then in those OS
>> specific files add the delta configuration lines.
>>
>> Signed-off-by: Keith Wiles <keith.wiles@intel.com>
>
> It's also fixing the crypto settings which were mispelled for BSD.
>
> Applied with few cosmetic adjustments, thanks.
>
This is already applied, but,
Is it required to keep Linux specific features
(igb_uio/vfio/kni/vhost..) in base config? Why not move all to Linux
only config?
Because they show up in final bsd config, which is unnecessary. Also
they show up in final Linux config twice, first one disables feature and
second one enables back. Although this works fine both for bsd and
Linux, it is confusing.
I will send a patch for this.
Thanks,
ferruh
2016-03-06 01:11, Ferruh Yigit:
> On 3/4/2016 10:43 PM, Thomas Monjalon wrote:
> > 2016-03-04 12:11, Keith Wiles:
> >> In order to cleanup the configuration files some and reduce
> >> the number of duplicate configuration information. Add a new
> >> file called common_base which contains just about all of the
> >> configuration lines in one place. Then have the common_bsdapp,
> >> common_linuxapp files include this one file. Then in those OS
> >> specific files add the delta configuration lines.
> >>
> >> Signed-off-by: Keith Wiles <keith.wiles@intel.com>
> >
> > It's also fixing the crypto settings which were mispelled for BSD.
> >
> > Applied with few cosmetic adjustments, thanks.
> >
> This is already applied, but,
>
> Is it required to keep Linux specific features
> (igb_uio/vfio/kni/vhost..) in base config? Why not move all to Linux
> only config?
I have no strong opinion.
Keeping them in the base file makes easy to list every options.
On the other hand, we already have MPIPE defined only in tilegx config
and CONTIGEM only in bsdapp.
> Because they show up in final bsd config, which is unnecessary. Also
> they show up in final Linux config twice, first one disables feature and
> second one enables back. Although this works fine both for bsd and
> Linux, it is confusing.
On Sun, Mar 06, 2016 at 10:35:50AM +0100, Thomas Monjalon wrote:
> 2016-03-06 01:11, Ferruh Yigit:
> > On 3/4/2016 10:43 PM, Thomas Monjalon wrote:
> > > 2016-03-04 12:11, Keith Wiles:
> > >> In order to cleanup the configuration files some and reduce
> > >> the number of duplicate configuration information. Add a new
> > >> file called common_base which contains just about all of the
> > >> configuration lines in one place. Then have the common_bsdapp,
> > >> common_linuxapp files include this one file. Then in those OS
> > >> specific files add the delta configuration lines.
> > >>
> > >> Signed-off-by: Keith Wiles <keith.wiles@intel.com>
> > >
> > > It's also fixing the crypto settings which were mispelled for BSD.
> > >
> > > Applied with few cosmetic adjustments, thanks.
> > >
> > This is already applied, but,
> >
> > Is it required to keep Linux specific features
> > (igb_uio/vfio/kni/vhost..) in base config? Why not move all to Linux
> > only config?
>
> I have no strong opinion.
> Keeping them in the base file makes easy to list every options.
> On the other hand, we already have MPIPE defined only in tilegx config
> and CONTIGEM only in bsdapp.
>
> > Because they show up in final bsd config, which is unnecessary. Also
> > they show up in final Linux config twice, first one disables feature and
> > second one enables back. Although this works fine both for bsd and
> > Linux, it is confusing.
>
I prefer to have them in, so that the base config shows all config options.
Otherwise if a config option only used on one platform suddenly becomes used on
a second one, we need to start patching the base config to move it from a
platform-specific one to a common one. [Or worse, we start having cases where
we have to make a judgement call as to whether something is a common option
or not!]
/Bruce
new file mode 100644
@@ -0,0 +1,519 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#
+# The following three configs are for reference only and should be
+# enabled in the correct defconfig_XXX file(s).
+#
+
+################
+#
+# machine can define specific variables or action for a specific board
+# RTE_MACHINE values are the directories in mk/machine/
+#
+CONFIG_RTE_MACHINE=
+
+#
+# define the architecture we compile for.
+# RTE_ARCH values are the directories in mk/arch/
+#
+CONFIG_RTE_ARCH=
+
+#
+# The compiler we use.
+# RTE_TOOLCHAIN values are the directories in mk/toolchain/
+#
+CONFIG_RTE_TOOLCHAIN=
+
+################
+
+#
+# Use intrinsics or assembly code for key routines
+#
+CONFIG_RTE_FORCE_INTRINSICS=n
+
+#
+# Machine forces strict alignment constraints.
+#
+CONFIG_RTE_ARCH_STRICT_ALIGN=n
+
+#
+# Compile to share library
+#
+CONFIG_RTE_BUILD_SHARED_LIB=n
+
+#
+# Use newest code breaking previous ABI
+#
+CONFIG_RTE_NEXT_ABI=y
+
+#
+# Machine's cache line size
+#
+CONFIG_RTE_CACHE_LINE_SIZE=64
+
+#
+# Compile Environment Abstraction Layer
+#
+CONFIG_RTE_LIBRTE_EAL=y
+CONFIG_RTE_MAX_LCORE=128
+CONFIG_RTE_MAX_NUMA_NODES=8
+CONFIG_RTE_MAX_MEMSEG=256
+CONFIG_RTE_MAX_MEMZONE=2560
+CONFIG_RTE_MAX_TAILQ=32
+CONFIG_RTE_LOG_LEVEL=8
+CONFIG_RTE_LOG_HISTORY=256
+CONFIG_RTE_LIBEAL_USE_HPET=n
+CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
+CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
+CONFIG_RTE_EAL_IGB_UIO=n
+CONFIG_RTE_EAL_VFIO=n
+CONFIG_RTE_MALLOC_DEBUG=n
+
+# Default driver path (or "" to disable)
+CONFIG_RTE_EAL_PMD_PATH=""
+
+#
+# Special configurations in PCI Config Space for high performance
+#
+CONFIG_RTE_PCI_CONFIG=n
+CONFIG_RTE_PCI_EXTENDED_TAG=""
+CONFIG_RTE_PCI_MAX_READ_REQUEST_SIZE=0
+
+#
+# Compile Environment Abstraction Layer to support Vmware TSC map
+#
+CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
+
+#
+# Compile the argument parser library
+#
+CONFIG_RTE_LIBRTE_KVARGS=y
+
+#
+# Compile generic ethernet library
+#
+CONFIG_RTE_LIBRTE_ETHER=y
+CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
+CONFIG_RTE_MAX_ETHPORTS=32
+CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
+CONFIG_RTE_LIBRTE_IEEE1588=n
+CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
+CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
+
+#
+# Support NIC bypass logic
+#
+CONFIG_RTE_NIC_BYPASS=n
+
+#
+# Compile burst-oriented IGB & EM PMD drivers
+#
+CONFIG_RTE_LIBRTE_EM_PMD=y
+CONFIG_RTE_LIBRTE_IGB_PMD=y
+CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
+
+#
+# Compile burst-oriented IXGBE PMD driver
+#
+CONFIG_RTE_LIBRTE_IXGBE_PMD=y
+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
+CONFIG_RTE_IXGBE_INC_VECTOR=y
+CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
+
+#
+# Compile burst-oriented I40E PMD driver
+#
+CONFIG_RTE_LIBRTE_I40E_PMD=y
+CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
+CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
+CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
+CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
+CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
+CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
+CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
+# interval up to 8160 us, aligned to 2 (or default value)
+CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
+
+#
+# Compile burst-oriented FM10K PMD
+#
+CONFIG_RTE_LIBRTE_FM10K_PMD=y
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
+CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
+
+#
+# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
+#
+CONFIG_RTE_LIBRTE_MLX4_PMD=n
+CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
+CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
+CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
+CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
+
+#
+# Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
+#
+CONFIG_RTE_LIBRTE_MLX5_PMD=n
+CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4
+CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
+CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
+
+#
+# Compile burst-oriented Broadcom PMD driver
+#
+CONFIG_RTE_LIBRTE_BNX2X_PMD=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
+
+#
+# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
+#
+CONFIG_RTE_LIBRTE_CXGBE_PMD=y
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
+
+#
+# Compile burst-oriented Cisco ENIC PMD driver
+#
+CONFIG_RTE_LIBRTE_ENIC_PMD=y
+CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
+
+#
+# Compile burst-oriented Netronome NFP PMD driver
+#
+CONFIG_RTE_LIBRTE_NFP_PMD=n
+CONFIG_RTE_LIBRTE_NFP_DEBUG=n
+
+#
+# Compile software PMD backed by SZEDATA2 device
+#
+CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
+
+#
+# Compile burst-oriented VIRTIO PMD driver
+#
+CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
+
+#
+# Compile burst-oriented VMXNET3 PMD driver
+#
+CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
+
+#
+# Compile example software rings based PMD
+#
+CONFIG_RTE_LIBRTE_PMD_RING=y
+CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
+CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
+
+#
+# Compile software PMD backed by PCAP files
+#
+CONFIG_RTE_LIBRTE_PMD_PCAP=n
+
+#
+# Compile link bonding PMD library
+#
+CONFIG_RTE_LIBRTE_PMD_BOND=y
+CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
+CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
+
+#
+# Compile software PMD backed by AF_PACKET sockets (Linux only)
+#
+CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
+
+#
+# Compile Xen PMD
+#
+CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
+
+#
+# Compile null PMD
+#
+CONFIG_RTE_LIBRTE_PMD_NULL=y
+
+#
+# Do prefetch of packet data within PMD driver receive function
+#
+CONFIG_RTE_PMD_PACKET_PREFETCH=y
+
+#
+# Compile generic crypto device library
+# EXPERIMENTAL: API may change without prior notice
+#
+CONFIG_RTE_LIBRTE_CRYPTODEV=y
+CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
+CONFIG_RTE_CRYPTO_MAX_DEVS=64
+CONFIG_RTE_CRYPTODEV_NAME_LEN=64
+
+#
+# Compile PMD for QuickAssist based devices
+#
+CONFIG_RTE_LIBRTE_PMD_QAT=n
+CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
+#
+# Number of sessions to create in the session memory pool
+# on a single QuickAssist device.
+#
+CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
+
+#
+# Compile PMD for AESNI backed device
+#
+CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
+CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
+CONFIG_RTE_AESNI_MB_PMD_MAX_NB_QUEUE_PAIRS=8
+CONFIG_RTE_AESNI_MB_PMD_MAX_NB_SESSIONS=2048
+
+#
+# Compile librte_ring
+#
+CONFIG_RTE_LIBRTE_RING=y
+CONFIG_RTE_LIBRTE_RING_DEBUG=n
+CONFIG_RTE_RING_SPLIT_PROD_CONS=n
+CONFIG_RTE_RING_PAUSE_REP_COUNT=0
+
+#
+# Compile librte_mempool
+#
+CONFIG_RTE_LIBRTE_MEMPOOL=y
+CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
+CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
+
+#
+# Compile librte_mbuf
+#
+CONFIG_RTE_LIBRTE_MBUF=y
+CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
+CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
+CONFIG_RTE_PKTMBUF_HEADROOM=128
+
+#
+# Compile librte_mbuf_offload
+# EXPERIMENTAL: API may change without prior notice
+#
+CONFIG_RTE_LIBRTE_MBUF_OFFLOAD=y
+CONFIG_RTE_LIBRTE_MBUF_OFFLOAD_DEBUG=n
+
+#
+# Compile librte_timer
+#
+CONFIG_RTE_LIBRTE_TIMER=y
+CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
+
+#
+# Compile librte_cfgfile
+#
+CONFIG_RTE_LIBRTE_CFGFILE=y
+
+#
+# Compile librte_cmdline
+#
+CONFIG_RTE_LIBRTE_CMDLINE=y
+CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
+
+#
+# Compile librte_hash
+#
+CONFIG_RTE_LIBRTE_HASH=y
+CONFIG_RTE_LIBRTE_HASH_DEBUG=n
+
+#
+# Compile librte_jobstats
+#
+CONFIG_RTE_LIBRTE_JOBSTATS=y
+
+#
+# Compile librte_lpm
+#
+CONFIG_RTE_LIBRTE_LPM=y
+CONFIG_RTE_LIBRTE_LPM_DEBUG=n
+
+#
+# Compile librte_acl
+#
+CONFIG_RTE_LIBRTE_ACL=y
+CONFIG_RTE_LIBRTE_ACL_DEBUG=n
+
+#
+# Compile librte_power
+#
+CONFIG_RTE_LIBRTE_POWER=n
+CONFIG_RTE_LIBRTE_POWER_DEBUG=n
+CONFIG_RTE_MAX_LCORE_FREQS=64
+
+#
+# Compile librte_net
+#
+CONFIG_RTE_LIBRTE_NET=y
+
+#
+# Compile librte_ip_frag
+#
+CONFIG_RTE_LIBRTE_IP_FRAG=y
+CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
+CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
+CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
+
+#
+# Compile librte_meter
+#
+CONFIG_RTE_LIBRTE_METER=y
+
+#
+# Compile librte_sched
+#
+CONFIG_RTE_LIBRTE_SCHED=y
+CONFIG_RTE_SCHED_DEBUG=n
+CONFIG_RTE_SCHED_RED=n
+CONFIG_RTE_SCHED_COLLECT_STATS=n
+CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
+CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
+CONFIG_RTE_SCHED_VECTOR=n
+
+#
+# Compile the distributor library
+#
+CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
+
+#
+# Compile the reorder library
+#
+CONFIG_RTE_LIBRTE_REORDER=y
+
+#
+# Compile librte_port
+#
+CONFIG_RTE_LIBRTE_PORT=y
+CONFIG_RTE_PORT_STATS_COLLECT=n
+
+#
+# Compile librte_table
+#
+CONFIG_RTE_LIBRTE_TABLE=y
+CONFIG_RTE_TABLE_STATS_COLLECT=n
+
+#
+# Compile librte_pipeline
+#
+CONFIG_RTE_LIBRTE_PIPELINE=y
+CONFIG_RTE_PIPELINE_STATS_COLLECT=n
+
+#
+# Compile librte_kni
+#
+CONFIG_RTE_LIBRTE_KNI=n
+CONFIG_RTE_KNI_KMOD=n
+CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
+CONFIG_RTE_KNI_KO_DEBUG=n
+CONFIG_RTE_KNI_VHOST=n
+CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
+CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
+CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
+CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
+
+#
+# Compile vhost library
+# fuse-devel is needed to run vhost-cuse.
+# fuse-devel enables user space char driver development
+# vhost-user is turned on by default.
+#
+CONFIG_RTE_LIBRTE_VHOST=n
+CONFIG_RTE_LIBRTE_VHOST_USER=y
+CONFIG_RTE_LIBRTE_VHOST_NUMA=n
+CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
+
+#
+#Compile Xen domain0 support
+#
+CONFIG_RTE_LIBRTE_XEN_DOM0=n
+
+#
+# Enable warning directives
+#
+CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
+
+#
+# Compile the test application
+#
+CONFIG_RTE_APP_TEST=y
+
+#
+# Compile the PMD test application
+#
+CONFIG_RTE_TEST_PMD=y
+CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
+CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
@@ -1,6 +1,6 @@
# BSD LICENSE
#
-# Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
@@ -37,69 +37,12 @@
CONFIG_RTE_EXEC_ENV="bsdapp"
CONFIG_RTE_EXEC_ENV_BSDAPP=y
-##
-## machine can define specific variables or action for a specific board
-## RTE_MACHINE values are the directories in mk/machine/
-##
-#CONFIG_RTE_MACHINE="native"
-#
-##
-## define the architecture we compile for.
-## RTE_ARCH values are the directories in mk/arch/
-##
-#CONFIG_RTE_ARCH="x86_64"
-#CONFIG_RTE_ARCH_X86_64=y
-#CONFIG_RTE_ARCH_X86=y
-#
-##
-## The compiler we use.
-## RTE_TOOLCHAIN values are the directories in mk/toolchain/
-##
-#CONFIG_RTE_TOOLCHAIN="gcc"
-#CONFIG_RTE_TOOLCHAIN_GCC=y
-
-#
-# Use intrinsics or assembly code for key routines
-#
-CONFIG_RTE_FORCE_INTRINSICS=n
-
-#
-# Machine forces strict alignment constraints.
-#
-CONFIG_RTE_ARCH_STRICT_ALIGN=n
-
-#
-# Compile to share library
-#
-CONFIG_RTE_BUILD_SHARED_LIB=n
+#include "common_base"
#
-# Use newest code breaking previous ABI
+# Compile Environment Abstraction Layer for FreeBSD
#
-CONFIG_RTE_NEXT_ABI=y
-
-#
-# Machine's cache line size
-#
-CONFIG_RTE_CACHE_LINE_SIZE=64
-
-#
-# Compile Environment Abstraction Layer
-#
-CONFIG_RTE_LIBRTE_EAL=y
-CONFIG_RTE_MAX_LCORE=128
-CONFIG_RTE_MAX_NUMA_NODES=8
-CONFIG_RTE_MAX_MEMSEG=256
-CONFIG_RTE_MAX_MEMZONE=2560
-CONFIG_RTE_MAX_TAILQ=32
-CONFIG_RTE_LOG_LEVEL=8
-CONFIG_RTE_LOG_HISTORY=256
-CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
-CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
-CONFIG_RTE_MALLOC_DEBUG=n
-
-# Default driver path (or "" to disable)
-CONFIG_RTE_EAL_PMD_PATH=""
+CONFIG_RTE_LIBRTE_EAL_BSDAPP=y
#
# FreeBSD contiguous memory driver settings
@@ -107,374 +50,3 @@ CONFIG_RTE_EAL_PMD_PATH=""
CONFIG_RTE_CONTIGMEM_MAX_NUM_BUFS=64
CONFIG_RTE_CONTIGMEM_DEFAULT_NUM_BUFS=2
CONFIG_RTE_CONTIGMEM_DEFAULT_BUF_SIZE=1024*1024*1024
-
-#
-# Compile Environment Abstraction Layer for BSD
-#
-CONFIG_RTE_LIBRTE_EAL_BSDAPP=y
-
-#
-# Compile Environment Abstraction Layer for linux
-#
-CONFIG_RTE_LIBRTE_EAL_LINUXAPP=n
-
-#
-# Compile Environment Abstraction Layer to support Vmware TSC map
-#
-CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
-
-#
-# Compile the argument parser library
-#
-CONFIG_RTE_LIBRTE_KVARGS=y
-
-#
-# Compile generic ethernet library
-#
-CONFIG_RTE_LIBRTE_ETHER=y
-CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
-CONFIG_RTE_MAX_ETHPORTS=32
-CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
-CONFIG_RTE_LIBRTE_IEEE1588=n
-CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
-CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
-
-#
-# Support NIC bypass logic
-#
-CONFIG_RTE_NIC_BYPASS=n
-
-#
-# Compile burst-oriented IGB & EM PMD drivers
-#
-CONFIG_RTE_LIBRTE_EM_PMD=y
-CONFIG_RTE_LIBRTE_IGB_PMD=y
-CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
-
-#
-# Compile burst-oriented IXGBE PMD driver
-#
-CONFIG_RTE_LIBRTE_IXGBE_PMD=y
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
-CONFIG_RTE_IXGBE_INC_VECTOR=y
-CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
-
-#
-# Compile burst-oriented I40E PMD driver
-#
-CONFIG_RTE_LIBRTE_I40E_PMD=y
-CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
-CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
-CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
-CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
-# interval up to 8160 us, aligned to 2 (or default value)
-CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
-
-#
-# Compile burst-oriented FM10K PMD
-#
-CONFIG_RTE_LIBRTE_FM10K_PMD=y
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
-
-#
-# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
-#
-CONFIG_RTE_LIBRTE_MLX4_PMD=n
-CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
-CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
-CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
-CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
-
-#
-# Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
-#
-CONFIG_RTE_LIBRTE_MLX5_PMD=n
-CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4
-CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
-CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
-
-#
-# Compile burst-oriented Broadcom PMD driver
-#
-CONFIG_RTE_LIBRTE_BNX2X_PMD=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
-
-#
-# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
-#
-CONFIG_RTE_LIBRTE_CXGBE_PMD=y
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
-
-#
-# Compile burst-oriented Cisco ENIC PMD driver
-#
-CONFIG_RTE_LIBRTE_ENIC_PMD=y
-CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
-
-#
-# Compile software PMD backed by SZEDATA2 device
-#
-CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
-
-#
-# Compile burst-oriented VIRTIO PMD driver
-#
-CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
-
-#
-# Compile burst-oriented VMXNET3 PMD driver
-#
-CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
-
-#
-# Compile example software rings based PMD
-#
-CONFIG_RTE_LIBRTE_PMD_RING=y
-CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
-CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
-
-#
-# Compile software PMD backed by PCAP files
-#
-CONFIG_RTE_LIBRTE_PMD_PCAP=y
-
-#
-# Compile link bonding PMD library
-#
-CONFIG_RTE_LIBRTE_PMD_BOND=y
-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
-
-#
-# Compile null PMD
-#
-CONFIG_RTE_LIBRTE_PMD_NULL=y
-
-#
-# Do prefetch of packet data within PMD driver receive function
-#
-CONFIG_RTE_PMD_PACKET_PREFETCH=y
-
-#
-# Compile generic crypto device library
-# EXPERIMENTAL: API may change without prior notice
-#
-CONFIG_RTE_LIBRTE_CRYPTODEV=y
-CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
-CONFIG_RTE_CRYPTO_MAX_DEVS=64
-CONFIG_RTE_CRYPTODEV_NAME_LEN=64
-
-#
-# Compile PMD for QuickAssist based devices
-#
-CONFIG_RTE_LIBRTE_PMD_QAT=n
-CONFIG_RTE_LIBRTE_QAT_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_QAT_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_QAT_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_QAT_DEBUG_DRIVER=n
-#
-# Number of sessions to create in the session memory pool
-# on a single QuickAssist device.
-#
-CONFIG_RTE_MAX_QAT_SESSIONS=200
-
-#
-# Compile PMD for AESNI backed device
-#
-CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
-CONFIG_RTE_LIBRTE_AESNI_MB_DEBUG=n
-
-#
-# Compile librte_ring
-#
-CONFIG_RTE_LIBRTE_RING=y
-CONFIG_RTE_LIBRTE_RING_DEBUG=n
-CONFIG_RTE_RING_SPLIT_PROD_CONS=n
-CONFIG_RTE_RING_PAUSE_REP_COUNT=0
-
-#
-# Compile librte_mempool
-#
-CONFIG_RTE_LIBRTE_MEMPOOL=y
-CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
-CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
-
-#
-# Compile librte_mbuf
-#
-CONFIG_RTE_LIBRTE_MBUF=y
-CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
-CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
-CONFIG_RTE_PKTMBUF_HEADROOM=128
-
-#
-# Compile librte_mbuf_offload
-# EXPERIMENTAL: API may change without prior notice
-#
-CONFIG_RTE_LIBRTE_MBUF_OFFLOAD=y
-CONFIG_RTE_LIBRTE_MBUF_OFFLOAD_DEBUG=n
-
-#
-# Compile librte_timer
-#
-CONFIG_RTE_LIBRTE_TIMER=y
-CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
-
-#
-# Compile librte_cfgfile
-#
-CONFIG_RTE_LIBRTE_CFGFILE=y
-
-#
-# Compile librte_cmdline
-#
-CONFIG_RTE_LIBRTE_CMDLINE=y
-CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
-
-#
-# Compile librte_hash
-#
-CONFIG_RTE_LIBRTE_HASH=y
-CONFIG_RTE_LIBRTE_HASH_DEBUG=n
-
-#
-# Compile librte_jobstats
-#
-CONFIG_RTE_LIBRTE_JOBSTATS=y
-
-#
-# Compile librte_lpm
-#
-CONFIG_RTE_LIBRTE_LPM=y
-CONFIG_RTE_LIBRTE_LPM_DEBUG=n
-
-#
-# Compile librte_acl
-#
-CONFIG_RTE_LIBRTE_ACL=y
-CONFIG_RTE_LIBRTE_ACL_DEBUG=n
-
-#
-# Compile librte_power
-#
-CONFIG_RTE_LIBRTE_POWER=n
-CONFIG_RTE_LIBRTE_POWER_DEBUG=n
-CONFIG_RTE_MAX_LCORE_FREQS=64
-
-#
-# Compile librte_net
-#
-CONFIG_RTE_LIBRTE_NET=y
-
-#
-# Compile librte_ip_frag
-#
-CONFIG_RTE_LIBRTE_IP_FRAG=y
-CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
-CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
-CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
-
-#
-# Compile librte_meter
-#
-CONFIG_RTE_LIBRTE_METER=y
-
-#
-# Compile librte_sched
-#
-CONFIG_RTE_LIBRTE_SCHED=y
-CONFIG_RTE_SCHED_DEBUG=n
-CONFIG_RTE_SCHED_RED=n
-CONFIG_RTE_SCHED_COLLECT_STATS=n
-CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
-CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
-CONFIG_RTE_SCHED_VECTOR=n
-
-#
-# Compile the distributor library
-#
-CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
-
-#
-# Compile the reorder library
-#
-CONFIG_RTE_LIBRTE_REORDER=y
-
-#
-# Compile librte_port
-#
-CONFIG_RTE_LIBRTE_PORT=y
-CONFIG_RTE_PORT_STATS_COLLECT=n
-
-#
-# Compile librte_table
-#
-CONFIG_RTE_LIBRTE_TABLE=y
-CONFIG_RTE_TABLE_STATS_COLLECT=n
-
-#
-# Compile librte_pipeline
-#
-CONFIG_RTE_LIBRTE_PIPELINE=y
-CONFIG_RTE_PIPELINE_STATS_COLLECT=n
-
-#
-# Enable warning directives
-#
-CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
-
-#
-# Compile the test application
-#
-CONFIG_RTE_APP_TEST=y
-
-#
-# Compile the PMD test application
-#
-CONFIG_RTE_TEST_PMD=y
-CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
-CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
@@ -1,6 +1,6 @@
# BSD LICENSE
#
-# Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
@@ -37,78 +37,7 @@
CONFIG_RTE_EXEC_ENV="linuxapp"
CONFIG_RTE_EXEC_ENV_LINUXAPP=y
-##
-## machine can define specific variables or action for a specific board
-## RTE_MACHINE values are the directories in mk/machine/
-##
-#CONFIG_RTE_MACHINE="native"
-#
-##
-## define the architecture we compile for.
-## RTE_ARCH values are the directories in mk/arch/
-##
-#CONFIG_RTE_ARCH="x86_64"
-#CONFIG_RTE_ARCH_X86_64=y
-#CONFIG_RTE_ARCH_X86=y
-#
-##
-## The compiler we use.
-## RTE_TOOLCHAIN values are the directories in mk/toolchain/
-##
-#CONFIG_RTE_TOOLCHAIN="gcc"
-#CONFIG_RTE_TOOLCHAIN_GCC=y
-
-#
-# Use intrinsics or assembly code for key routines
-#
-CONFIG_RTE_FORCE_INTRINSICS=n
-
-#
-# Machine forces strict alignment constraints.
-#
-CONFIG_RTE_ARCH_STRICT_ALIGN=n
-
-#
-# Compile to share library
-#
-CONFIG_RTE_BUILD_SHARED_LIB=n
-
-#
-# Use newest code breaking previous ABI
-#
-CONFIG_RTE_NEXT_ABI=y
-
-#
-# Machine's cache line size
-#
-CONFIG_RTE_CACHE_LINE_SIZE=64
-
-#
-# Compile Environment Abstraction Layer
-#
-CONFIG_RTE_LIBRTE_EAL=y
-CONFIG_RTE_MAX_LCORE=128
-CONFIG_RTE_MAX_NUMA_NODES=8
-CONFIG_RTE_MAX_MEMSEG=256
-CONFIG_RTE_MAX_MEMZONE=2560
-CONFIG_RTE_MAX_TAILQ=32
-CONFIG_RTE_LOG_LEVEL=8
-CONFIG_RTE_LOG_HISTORY=256
-CONFIG_RTE_LIBEAL_USE_HPET=n
-CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
-CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
-CONFIG_RTE_EAL_IGB_UIO=y
-CONFIG_RTE_EAL_VFIO=y
-CONFIG_RTE_MALLOC_DEBUG=n
-# Default driver path (or "" to disable)
-CONFIG_RTE_EAL_PMD_PATH=""
-
-#
-# Special configurations in PCI Config Space for high performance
-#
-CONFIG_RTE_PCI_CONFIG=n
-CONFIG_RTE_PCI_EXTENDED_TAG=""
-CONFIG_RTE_PCI_MAX_READ_REQUEST_SIZE=0
+#include "common_base"
#
# Compile Environment Abstraction Layer for linux
@@ -116,182 +45,10 @@ CONFIG_RTE_PCI_MAX_READ_REQUEST_SIZE=0
CONFIG_RTE_LIBRTE_EAL_LINUXAPP=y
#
-# Compile Environment Abstraction Layer to support Vmware TSC map
-#
-CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
-
-#
-# Compile the argument parser library
-#
-CONFIG_RTE_LIBRTE_KVARGS=y
-
-#
-# Compile generic ethernet library
-#
-CONFIG_RTE_LIBRTE_ETHER=y
-CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
-CONFIG_RTE_MAX_ETHPORTS=32
-CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
-CONFIG_RTE_LIBRTE_IEEE1588=n
-CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
-CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
-
-#
-# Support NIC bypass logic
-#
-CONFIG_RTE_NIC_BYPASS=n
-
-#
-# Compile burst-oriented IGB & EM PMD drivers
-#
-CONFIG_RTE_LIBRTE_EM_PMD=y
-CONFIG_RTE_LIBRTE_IGB_PMD=y
-CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
-
-#
-# Compile burst-oriented IXGBE PMD driver
-#
-CONFIG_RTE_LIBRTE_IXGBE_PMD=y
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
-CONFIG_RTE_IXGBE_INC_VECTOR=y
-CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
-
-#
-# Compile burst-oriented I40E PMD driver
-#
-CONFIG_RTE_LIBRTE_I40E_PMD=y
-CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
-CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
-CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
-CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
-# interval up to 8160 us, aligned to 2 (or default value)
-CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
-
-#
-# Compile burst-oriented FM10K PMD
-#
-CONFIG_RTE_LIBRTE_FM10K_PMD=y
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
-CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
-
-#
-# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
-#
-CONFIG_RTE_LIBRTE_MLX4_PMD=n
-CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
-CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
-CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
-CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
-
-#
-# Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
-#
-CONFIG_RTE_LIBRTE_MLX5_PMD=n
-CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4
-CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
-CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
-
-#
-# Compile burst-oriented Broadcom PMD driver
-#
-CONFIG_RTE_LIBRTE_BNX2X_PMD=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
-
-#
-# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
-#
-CONFIG_RTE_LIBRTE_CXGBE_PMD=y
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
-
-#
-# Compile burst-oriented Cisco ENIC PMD driver
-#
-CONFIG_RTE_LIBRTE_ENIC_PMD=y
-CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
-
-#
-# Compile burst-oriented Netronome NFP PMD driver
-#
-CONFIG_RTE_LIBRTE_NFP_PMD=n
-CONFIG_RTE_LIBRTE_NFP_DEBUG=n
-
-#
-# Compile software PMD backed by SZEDATA2 device
-#
-CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
-
-#
-# Compile burst-oriented VIRTIO PMD driver
-#
-CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
-
-#
-# Compile burst-oriented VMXNET3 PMD driver
-#
-CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
-
-#
-# Compile example software rings based PMD
-#
-CONFIG_RTE_LIBRTE_PMD_RING=y
-CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
-CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
-
-#
-# Compile software PMD backed by PCAP files
-#
-CONFIG_RTE_LIBRTE_PMD_PCAP=n
-
-#
-# Compile link bonding PMD library
+# Common configurations for Linux support enabled here from 'common_base' file.
#
-CONFIG_RTE_LIBRTE_PMD_BOND=y
-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
+CONFIG_RTE_EAL_IGB_UIO=y
+CONFIG_RTE_EAL_VFIO=y
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
@@ -299,197 +56,15 @@ CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y
#
-# Compile Xen PMD
-#
-CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
-
-#
-# Compile null PMD
-#
-CONFIG_RTE_LIBRTE_PMD_NULL=y
-
-#
-# Do prefetch of packet data within PMD driver receive function
-#
-CONFIG_RTE_PMD_PACKET_PREFETCH=y
-
-#
-# Compile generic crypto device library
-# EXPERIMENTAL: API may change without prior notice
-#
-CONFIG_RTE_LIBRTE_CRYPTODEV=y
-CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
-CONFIG_RTE_CRYPTO_MAX_DEVS=64
-CONFIG_RTE_CRYPTODEV_NAME_LEN=64
-
-#
-# Compile PMD for QuickAssist based devices
-#
-CONFIG_RTE_LIBRTE_PMD_QAT=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
-#
-# Number of sessions to create in the session memory pool
-# on a single QuickAssist device.
-#
-CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
-
-#
-# Compile PMD for AESNI backed device
-#
-CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
-CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
-CONFIG_RTE_AESNI_MB_PMD_MAX_NB_QUEUE_PAIRS=8
-CONFIG_RTE_AESNI_MB_PMD_MAX_NB_SESSIONS=2048
-
-#
-# Compile librte_ring
-#
-CONFIG_RTE_LIBRTE_RING=y
-CONFIG_RTE_LIBRTE_RING_DEBUG=n
-CONFIG_RTE_RING_SPLIT_PROD_CONS=n
-CONFIG_RTE_RING_PAUSE_REP_COUNT=0
-
-#
-# Compile librte_mempool
-#
-CONFIG_RTE_LIBRTE_MEMPOOL=y
-CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
-CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
-
-#
-# Compile librte_mbuf
-#
-CONFIG_RTE_LIBRTE_MBUF=y
-CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
-CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
-CONFIG_RTE_PKTMBUF_HEADROOM=128
-
-#
-# Compile librte_mbuf_offload
-# EXPERIMENTAL: API may change without prior notice
-#
-CONFIG_RTE_LIBRTE_MBUF_OFFLOAD=y
-CONFIG_RTE_LIBRTE_MBUF_OFFLOAD_DEBUG=n
-
-#
-# Compile librte_timer
-#
-CONFIG_RTE_LIBRTE_TIMER=y
-CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
-
-#
-# Compile librte_cfgfile
-#
-CONFIG_RTE_LIBRTE_CFGFILE=y
-
-#
-# Compile librte_cmdline
-#
-CONFIG_RTE_LIBRTE_CMDLINE=y
-CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
-
-#
-# Compile librte_hash
-#
-CONFIG_RTE_LIBRTE_HASH=y
-CONFIG_RTE_LIBRTE_HASH_DEBUG=n
-
-#
-# Compile librte_jobstats
-#
-CONFIG_RTE_LIBRTE_JOBSTATS=y
-
-#
-# Compile librte_lpm
-#
-CONFIG_RTE_LIBRTE_LPM=y
-CONFIG_RTE_LIBRTE_LPM_DEBUG=n
-
-#
-# Compile librte_acl
-#
-CONFIG_RTE_LIBRTE_ACL=y
-CONFIG_RTE_LIBRTE_ACL_DEBUG=n
-
-#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=y
-CONFIG_RTE_LIBRTE_POWER_DEBUG=n
-CONFIG_RTE_MAX_LCORE_FREQS=64
-
-#
-# Compile librte_net
-#
-CONFIG_RTE_LIBRTE_NET=y
-
-#
-# Compile librte_ip_frag
-#
-CONFIG_RTE_LIBRTE_IP_FRAG=y
-CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
-CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
-CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
-
-#
-# Compile librte_meter
-#
-CONFIG_RTE_LIBRTE_METER=y
-
-#
-# Compile librte_sched
-#
-CONFIG_RTE_LIBRTE_SCHED=y
-CONFIG_RTE_SCHED_DEBUG=n
-CONFIG_RTE_SCHED_RED=n
-CONFIG_RTE_SCHED_COLLECT_STATS=n
-CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
-CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
-CONFIG_RTE_SCHED_VECTOR=n
-
-#
-# Compile the distributor library
-#
-CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
-
-#
-# Compile the reorder library
-#
-CONFIG_RTE_LIBRTE_REORDER=y
-
-#
-# Compile librte_port
-#
-CONFIG_RTE_LIBRTE_PORT=y
-CONFIG_RTE_PORT_STATS_COLLECT=n
-
-#
-# Compile librte_table
-#
-CONFIG_RTE_LIBRTE_TABLE=y
-CONFIG_RTE_TABLE_STATS_COLLECT=n
-
-#
-# Compile librte_pipeline
-#
-CONFIG_RTE_LIBRTE_PIPELINE=y
-CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=y
CONFIG_RTE_KNI_KMOD=y
-CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
-CONFIG_RTE_KNI_KO_DEBUG=n
-CONFIG_RTE_KNI_VHOST=n
-CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
-CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
-CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
-CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
#
# Compile vhost library
@@ -498,28 +73,3 @@ CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
# vhost-user is turned on by default.
#
CONFIG_RTE_LIBRTE_VHOST=y
-CONFIG_RTE_LIBRTE_VHOST_USER=y
-CONFIG_RTE_LIBRTE_VHOST_NUMA=n
-CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
-
-#
-#Compile Xen domain0 support
-#
-CONFIG_RTE_LIBRTE_XEN_DOM0=n
-
-#
-# Enable warning directives
-#
-CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
-
-#
-# Compile the test application
-#
-CONFIG_RTE_APP_TEST=y
-
-#
-# Compile the PMD test application
-#
-CONFIG_RTE_TEST_PMD=y
-CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
-CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n