[dpdk-dev,v3] i40e: fix vlan filtering

Message ID 1454583736-20244-1-git-send-email-julien.meunier@6wind.com (mailing list archive)
State Accepted, archived
Delegated to: Bruce Richardson
Headers

Commit Message

Julien Meunier Feb. 4, 2016, 11:02 a.m. UTC
  VLAN filtering was always performed, even if hw_vlan_filter was
disabled. During device initialization, default filter
RTE_MACVLAN_PERFECT_MATCH was applied. In this situation, all incoming
VLAN frames were dropped by the card (increase of the register RUPP - Rx
Unsupported Protocol).

In order to restore default behavior, if HW VLAN filtering is activated,
set a filter to match MAC and VLAN. If not, set a filter to only match
MAC.

Signed-off-by: Julien Meunier <julien.meunier@6wind.com>
---
Changes since v2:
- switch log level from INFO to ERR in case of failure

Changes since v1:
- use ether_addr_copy() for mac copy
- add more debug messages in case of failure
- update all existing filters when multiple mac addresses have been configured
- when adding new mac address, use correct filter

TODO:
- i40e_update_default_filter_setting always forces to
  RTE_MACVLAN_PERFECT_MATCH.
  => The type of filter should be changed according to vlan filter setting.

- What happens if vlan filter setting changes when various filters are already
  set like RTE_MACVLAN_PERFECT_MATCH, RTE_MACVLAN_PERFECT_MATCH,
  RTE_MAC_HASH_MATCH, RTE_MACVLAN_HASH_MATCH ?
  => With testpmd, it is possible to add manually these filters. But when
  changing vlan filter setting, all previous filter set manually are overriden.
---
 drivers/net/i40e/i40e_ethdev.c | 73 ++++++++++++++++++++++++++++++++++++++++--
 drivers/net/i40e/i40e_ethdev.h |  1 +
 2 files changed, 72 insertions(+), 2 deletions(-)
  

Comments

Zhang, Helin Feb. 5, 2016, 12:20 a.m. UTC | #1
> -----Original Message-----
> From: Julien Meunier [mailto:julien.meunier@6wind.com]
> Sent: Thursday, February 4, 2016 7:02 PM
> To: Zhang, Helin <helin.zhang@intel.com>
> Cc: dev@dpdk.org
> Subject: [PATCH v3] i40e: fix vlan filtering
> 
> VLAN filtering was always performed, even if hw_vlan_filter was disabled.
> During device initialization, default filter RTE_MACVLAN_PERFECT_MATCH
> was applied. In this situation, all incoming VLAN frames were dropped by the
> card (increase of the register RUPP - Rx Unsupported Protocol).
> 
> In order to restore default behavior, if HW VLAN filtering is activated, set a
> filter to match MAC and VLAN. If not, set a filter to only match MAC.
> 
> Signed-off-by: Julien Meunier <julien.meunier@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
  
Bruce Richardson Feb. 24, 2016, 5:51 p.m. UTC | #2
On Fri, Feb 05, 2016 at 12:20:15AM +0000, Zhang, Helin wrote:
> 
> 
> > -----Original Message-----
> > From: Julien Meunier [mailto:julien.meunier@6wind.com]
> > Sent: Thursday, February 4, 2016 7:02 PM
> > To: Zhang, Helin <helin.zhang@intel.com>
> > Cc: dev@dpdk.org
> > Subject: [PATCH v3] i40e: fix vlan filtering
> > 
> > VLAN filtering was always performed, even if hw_vlan_filter was disabled.
> > During device initialization, default filter RTE_MACVLAN_PERFECT_MATCH
> > was applied. In this situation, all incoming VLAN frames were dropped by the
> > card (increase of the register RUPP - Rx Unsupported Protocol).
> > 
> > In order to restore default behavior, if HW VLAN filtering is activated, set a
> > filter to match MAC and VLAN. If not, set a filter to only match MAC.
> > 
> > Signed-off-by: Julien Meunier <julien.meunier@6wind.com>
> Acked-by: Helin Zhang <helin.zhang@intel.com>
> 
Applied to dpdk-next-net/rel_16_04

Thanks,
/Bruce
  

Patch

diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index bf6220d..750206b 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -2332,6 +2332,13 @@  i40e_vlan_offload_set(struct rte_eth_dev *dev, int mask)
 	struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
 	struct i40e_vsi *vsi = pf->main_vsi;
 
+	if (mask & ETH_VLAN_FILTER_MASK) {
+		if (dev->data->dev_conf.rxmode.hw_vlan_filter)
+			i40e_vsi_config_vlan_filter(vsi, TRUE);
+		else
+			i40e_vsi_config_vlan_filter(vsi, FALSE);
+	}
+
 	if (mask & ETH_VLAN_STRIP_MASK) {
 		/* Enable or disable VLAN stripping */
 		if (dev->data->dev_conf.rxmode.hw_vlan_strip)
@@ -2583,7 +2590,10 @@  i40e_macaddr_add(struct rte_eth_dev *dev,
 	}
 
 	(void)rte_memcpy(&mac_filter.mac_addr, mac_addr, ETHER_ADDR_LEN);
-	mac_filter.filter_type = RTE_MACVLAN_PERFECT_MATCH;
+	if (dev->data->dev_conf.rxmode.hw_vlan_filter)
+		mac_filter.filter_type = RTE_MACVLAN_PERFECT_MATCH;
+	else
+		mac_filter.filter_type = RTE_MAC_PERFECT_MATCH;
 
 	if (pool == 0)
 		vsi = pf->main_vsi;
@@ -4156,6 +4166,63 @@  fail_mem:
 	return NULL;
 }
 
+/* Configure vlan filter on or off */
+int
+i40e_vsi_config_vlan_filter(struct i40e_vsi *vsi, bool on)
+{
+	int i, num;
+	struct i40e_mac_filter *f;
+	struct i40e_mac_filter_info *mac_filter;
+	enum rte_mac_filter_type desired_filter;
+	int ret = I40E_SUCCESS;
+
+	if (on) {
+		/* Filter to match MAC and VLAN */
+		desired_filter = RTE_MACVLAN_PERFECT_MATCH;
+	} else {
+		/* Filter to match only MAC */
+		desired_filter = RTE_MAC_PERFECT_MATCH;
+	}
+
+	num = vsi->mac_num;
+
+	mac_filter = rte_zmalloc("mac_filter_info_data",
+				 num * sizeof(*mac_filter), 0);
+	if (mac_filter == NULL) {
+		PMD_DRV_LOG(ERR, "failed to allocate memory");
+		return I40E_ERR_NO_MEMORY;
+	}
+
+	i = 0;
+
+	/* Remove all existing mac */
+	TAILQ_FOREACH(f, &vsi->mac_list, next) {
+		mac_filter[i] = f->mac_info;
+		ret = i40e_vsi_delete_mac(vsi, &f->mac_info.mac_addr);
+		if (ret) {
+			PMD_DRV_LOG(ERR, "Update VSI failed to %s vlan filter",
+				    on ? "enable" : "disable");
+			goto DONE;
+		}
+		i++;
+	}
+
+	/* Override with new filter */
+	for (i = 0; i < num; i++) {
+		mac_filter[i].filter_type = desired_filter;
+		ret = i40e_vsi_add_mac(vsi, &mac_filter[i]);
+		if (ret) {
+			PMD_DRV_LOG(ERR, "Update VSI failed to %s vlan filter",
+				    on ? "enable" : "disable");
+			goto DONE;
+		}
+	}
+
+DONE:
+	rte_free(mac_filter);
+	return ret;
+}
+
 /* Configure vlan stripping on or off */
 int
 i40e_vsi_config_vlan_stripping(struct i40e_vsi *vsi, bool on)
@@ -4203,9 +4270,11 @@  i40e_dev_init_vlan(struct rte_eth_dev *dev)
 {
 	struct rte_eth_dev_data *data = dev->data;
 	int ret;
+	int mask = 0;
 
 	/* Apply vlan offload setting */
-	i40e_vlan_offload_set(dev, ETH_VLAN_STRIP_MASK);
+	mask = ETH_VLAN_STRIP_MASK | ETH_VLAN_FILTER_MASK;
+	i40e_vlan_offload_set(dev, mask);
 
 	/* Apply double-vlan setting, not implemented yet */
 
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index 1f9792b..5505d72 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -551,6 +551,7 @@  void i40e_vsi_queues_unbind_intr(struct i40e_vsi *vsi);
 int i40e_vsi_vlan_pvid_set(struct i40e_vsi *vsi,
 			   struct i40e_vsi_vlan_pvid_info *info);
 int i40e_vsi_config_vlan_stripping(struct i40e_vsi *vsi, bool on);
+int i40e_vsi_config_vlan_filter(struct i40e_vsi *vsi, bool on);
 uint64_t i40e_config_hena(uint64_t flags);
 uint64_t i40e_parse_hena(uint64_t flags);
 enum i40e_status_code i40e_fdir_setup_tx_resources(struct i40e_pf *pf);