[dpdk-dev,v1,3/3] drivers/net/vmxnet3: Add ethdev functions
Commit Message
Implements driver support for fetching Tx and Rx queue information, and
setting of MAC address.
Signed-off-by: Remy Horton <remy.horton@intel.com>
---
doc/guides/rel_notes/release_2_3.rst | 5 +++
drivers/net/vmxnet3/vmxnet3_ethdev.c | 60 ++++++++++++++++++++++++++++++++++++
2 files changed, 65 insertions(+)
Comments
On 1/28/16, 12:48 AM, "Remy Horton" <remy.horton@intel.com> wrote:
>Implements driver support for fetching Tx and Rx queue information, and
>setting of MAC address.
>
>Signed-off-by: Remy Horton <remy.horton@intel.com>
>---
> doc/guides/rel_notes/release_2_3.rst | 5 +++
> drivers/net/vmxnet3/vmxnet3_ethdev.c | 60 ++++++++++++++++++++++++++++++++++++
> 2 files changed, 65 insertions(+)
>
>diff --git a/doc/guides/rel_notes/release_2_3.rst b/doc/guides/rel_notes/release_2_3.rst
>index e6dab98..6a50e26 100644
>--- a/doc/guides/rel_notes/release_2_3.rst
>+++ b/doc/guides/rel_notes/release_2_3.rst
>@@ -13,6 +13,11 @@ New Features
>
> Implemented Tx & Rx queue information fetching functions.
>
>+* **vmxnet3: Added ethdev support functions.**
>+
>+ Implemented Tx & Rx queue information fetching and MAC address setting
>+ functions.
>+
>
> Resolved Issues
> ---------------
>diff --git a/drivers/net/vmxnet3/vmxnet3_ethdev.c b/drivers/net/vmxnet3/vmxnet3_ethdev.c
>index c363bf6..f7000d6 100644
>--- a/drivers/net/vmxnet3/vmxnet3_ethdev.c
>+++ b/drivers/net/vmxnet3/vmxnet3_ethdev.c
>@@ -91,6 +91,15 @@ static int vmxnet3_dev_vlan_filter_set(struct rte_eth_dev *dev,
> static void vmxnet3_dev_vlan_offload_set(struct rte_eth_dev *dev, int mask);
> static void vmxnet3_dev_vlan_offload_set_clear(struct rte_eth_dev *dev,
> int mask, int clear);
>+static void vmxnet3_mac_addr_set(struct rte_eth_dev *dev,
>+ struct ether_addr *mac_addr);
>+static void vmxnet3_rxq_info_get(struct rte_eth_dev *dev,
>+ uint16_t queue_id,
>+ struct rte_eth_rxq_info *qinfo);
>+static void vmxnet3_txq_info_get(struct rte_eth_dev *dev,
>+ uint16_t queue_id,
>+ struct rte_eth_txq_info *qinfo);
>+
>
> #if PROCESS_SYS_EVENTS == 1
> static void vmxnet3_process_events(struct vmxnet3_hw *);
>@@ -124,6 +133,9 @@ static const struct eth_dev_ops vmxnet3_eth_dev_ops = {
> .rx_queue_release = vmxnet3_dev_rx_queue_release,
> .tx_queue_setup = vmxnet3_dev_tx_queue_setup,
> .tx_queue_release = vmxnet3_dev_tx_queue_release,
>+ .mac_addr_set = vmxnet3_mac_addr_set,
>+ .rxq_info_get = vmxnet3_rxq_info_get,
>+ .txq_info_get = vmxnet3_txq_info_get,
> };
>
> static const struct rte_memzone *
>@@ -922,6 +934,54 @@ vmxnet3_process_events(struct vmxnet3_hw *hw)
> }
> #endif
>
>+static void vmxnet3_mac_addr_set(struct rte_eth_dev *dev,
>+ struct ether_addr *mac_addr)
>+{
>+ struct vmxnet3_hw *hw = dev->data->dev_private;
>+ uint32_t mac_hi, mac_lo;
>+
>+ memcpy(&mac_lo, mac_addr, 4);
>+ memcpy(&mac_hi, mac_addr + 4, 2);
>+ VMXNET3_WRITE_BAR1_REG(hw, VMXNET3_REG_MACL, mac_lo);
>+ VMXNET3_WRITE_BAR1_REG(hw, VMXNET3_REG_MACH, mac_hi);
>+
>+ ether_addr_copy(mac_addr, &dev->data->mac_addrs[0]);
Is this needed? Looks like rte_eth_dev_default_mac_addr_set() already
called it before calling the callback. Or is there another path that
this is not done?
>+}
>+
>+static void vmxnet3_rxq_info_get(struct rte_eth_dev *dev,
>+ uint16_t queue_id,
>+ struct rte_eth_rxq_info *qinfo)
>+{
>+ struct vmxnet3_rx_queue *rxq;
>+
>+ rxq = dev->data->rx_queues[queue_id];
>+
>+ qinfo->mp = rxq->mp;
>+ qinfo->scattered_rx = dev->data->scattered_rx;
>+ qinfo->nb_desc = dev->data->nb_rx_queues;
nb_rx_queues should be rxq->cmd_ring[0].size.
Furthermore, each rx queue have two rings that could in theory
be of different size. But since this info only, I think it’s
good enough to just report ring0’s size here.
>+
>+ /* Driver does not use these values */
>+ qinfo->conf.rx_free_thresh = 0;
>+ qinfo->conf.rx_drop_en = 0;
>+ qinfo->conf.rx_deferred_start = 0;
What about rx_thresh here?
>+}
>+
>+static void vmxnet3_txq_info_get(struct rte_eth_dev *dev,
>+ __rte_unused uint16_t queue_id,
>+ struct rte_eth_txq_info *qinfo)
>+{
>+ qinfo->nb_desc = dev->data->nb_tx_queues;
nb_tx_queues here should be txq->cmd_ring.size
>+
>+ /* Driver does not use these values */
>+ qinfo->conf.tx_thresh.pthresh = 0;
>+ qinfo->conf.tx_thresh.hthresh = 0;
>+ qinfo->conf.tx_thresh.wthresh = 0;
>+ qinfo->conf.tx_free_thresh = 0;
>+ qinfo->conf.tx_rs_thresh = 0;
>+ qinfo->conf.txq_flags = 0;
>+ qinfo->conf.tx_deferred_start = 0;
>+}
>+
> static struct rte_driver rte_vmxnet3_driver = {
> .type = PMD_PDEV,
> .init = rte_vmxnet3_pmd_init,
>--
>2.5.0
>
@@ -13,6 +13,11 @@ New Features
Implemented Tx & Rx queue information fetching functions.
+* **vmxnet3: Added ethdev support functions.**
+
+ Implemented Tx & Rx queue information fetching and MAC address setting
+ functions.
+
Resolved Issues
---------------
@@ -91,6 +91,15 @@ static int vmxnet3_dev_vlan_filter_set(struct rte_eth_dev *dev,
static void vmxnet3_dev_vlan_offload_set(struct rte_eth_dev *dev, int mask);
static void vmxnet3_dev_vlan_offload_set_clear(struct rte_eth_dev *dev,
int mask, int clear);
+static void vmxnet3_mac_addr_set(struct rte_eth_dev *dev,
+ struct ether_addr *mac_addr);
+static void vmxnet3_rxq_info_get(struct rte_eth_dev *dev,
+ uint16_t queue_id,
+ struct rte_eth_rxq_info *qinfo);
+static void vmxnet3_txq_info_get(struct rte_eth_dev *dev,
+ uint16_t queue_id,
+ struct rte_eth_txq_info *qinfo);
+
#if PROCESS_SYS_EVENTS == 1
static void vmxnet3_process_events(struct vmxnet3_hw *);
@@ -124,6 +133,9 @@ static const struct eth_dev_ops vmxnet3_eth_dev_ops = {
.rx_queue_release = vmxnet3_dev_rx_queue_release,
.tx_queue_setup = vmxnet3_dev_tx_queue_setup,
.tx_queue_release = vmxnet3_dev_tx_queue_release,
+ .mac_addr_set = vmxnet3_mac_addr_set,
+ .rxq_info_get = vmxnet3_rxq_info_get,
+ .txq_info_get = vmxnet3_txq_info_get,
};
static const struct rte_memzone *
@@ -922,6 +934,54 @@ vmxnet3_process_events(struct vmxnet3_hw *hw)
}
#endif
+static void vmxnet3_mac_addr_set(struct rte_eth_dev *dev,
+ struct ether_addr *mac_addr)
+{
+ struct vmxnet3_hw *hw = dev->data->dev_private;
+ uint32_t mac_hi, mac_lo;
+
+ memcpy(&mac_lo, mac_addr, 4);
+ memcpy(&mac_hi, mac_addr + 4, 2);
+ VMXNET3_WRITE_BAR1_REG(hw, VMXNET3_REG_MACL, mac_lo);
+ VMXNET3_WRITE_BAR1_REG(hw, VMXNET3_REG_MACH, mac_hi);
+
+ ether_addr_copy(mac_addr, &dev->data->mac_addrs[0]);
+}
+
+static void vmxnet3_rxq_info_get(struct rte_eth_dev *dev,
+ uint16_t queue_id,
+ struct rte_eth_rxq_info *qinfo)
+{
+ struct vmxnet3_rx_queue *rxq;
+
+ rxq = dev->data->rx_queues[queue_id];
+
+ qinfo->mp = rxq->mp;
+ qinfo->scattered_rx = dev->data->scattered_rx;
+ qinfo->nb_desc = dev->data->nb_rx_queues;
+
+ /* Driver does not use these values */
+ qinfo->conf.rx_free_thresh = 0;
+ qinfo->conf.rx_drop_en = 0;
+ qinfo->conf.rx_deferred_start = 0;
+}
+
+static void vmxnet3_txq_info_get(struct rte_eth_dev *dev,
+ __rte_unused uint16_t queue_id,
+ struct rte_eth_txq_info *qinfo)
+{
+ qinfo->nb_desc = dev->data->nb_tx_queues;
+
+ /* Driver does not use these values */
+ qinfo->conf.tx_thresh.pthresh = 0;
+ qinfo->conf.tx_thresh.hthresh = 0;
+ qinfo->conf.tx_thresh.wthresh = 0;
+ qinfo->conf.tx_free_thresh = 0;
+ qinfo->conf.tx_rs_thresh = 0;
+ qinfo->conf.txq_flags = 0;
+ qinfo->conf.tx_deferred_start = 0;
+}
+
static struct rte_driver rte_vmxnet3_driver = {
.type = PMD_PDEV,
.init = rte_vmxnet3_pmd_init,