183. VF Packet RxTX Tests

183.1. Test Case 1: VF_packet_IO_kernel_PF_dpdk_VF

  1. Got the pci device id of DUT, for example:

    ./usertools/dpdk-devbind.py -s
    
    0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
    0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
    
  2. Create 2 VFs from 2 PFs:

    echo 1 > /sys/bus/pci/devices/0000\:81\:00.0/sriov_numvfs
    echo 1 > /sys/bus/pci/devices/0000\:81\:00.1/sriov_numvfs
    ./usertools/dpdk-devbind.py -s
    
    0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
    0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
    0000:81:02.0 'XL710/X710 Virtual Function' unused=
    0000:81:0a.0 'XL710/X710 Virtual Function' unused=
    
  3. Detach VFs from the host, bind them to pci-stub driver:

    /sbin/modprobe pci-stub
    
    using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 154c",
    
    echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
    echo 0000:81:02.0 > /sys/bus/pci/devices/0000:08:02.0/driver/unbind
    echo 0000:81:02.0 > /sys/bus/pci/drivers/pci-stub/bind
    
    echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
    echo 0000:81:0a.0 > /sys/bus/pci/devices/0000:08:0a.0/driver/unbind
    echo 0000:81:0a.0 > /sys/bus/pci/drivers/pci-stub/bind
    

    or using the following more easy way:

    virsh nodedev-detach pci_0000_81_02_0;
    virsh nodedev-detach pci_0000_81_0a_0;
    
    ./usertools/dpdk-devbind.py -s
    
    0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
    0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
    0000:81:02.0 'XL710/X710 Virtual Function' if= drv=pci-stub unused=
    0000:81:0a.0 'XL710/X710 Virtual Function' if= drv=pci-stub unused=
    

    it can be seen that VFs 81:02.0 & 81:0a.0 ‘s drv is pci-stub.

  4. Passthrough VFs 81:02.0 & 81:0a.0 to vm0, and start vm0:

    /usr/bin/qemu-system-x86_64  -name vm0 -enable-kvm \
    -cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img -vnc :1 \
    -device pci-assign,host=81:02.0,id=pt_0 \
    -device pci-assign,host=81:0a.0,id=pt_1
    
  5. Login vm0, got VFs pci device id in vm0, assume they are 00:06.0 & 00:07.0, bind them to igb_uio driver, and then start testpmd, set it in mac forward mode:

    ./usertools/dpdk-devbind.py -s --bind=igb_uio 00:06.0 00:07.0
    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x0f -n 4 -a 00:06.0 -a 00:07.0 \
                                             -- -i --portmask=0x3
    
    testpmd> set fwd mac
    testpmd> start
    
  6. Get mac address of one VF and use it as dest mac, using scapy to send 2000 random packets from tester, verify the packets can be received by one VF and can be forward to another VF correctly.

183.2. Test Case 2: VF_packet_IO_dpdk_PF_dpdk_VF

  1. Got the pci device id of DUT, for example:

    ./usertools/dpdk-devbind.py -s
    
    0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
    0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
    
  2. bind pf to igb_uio and Create 2 VFs from 2 PFs:

    ./usertools/dpdk-devbind.py --bind=igb_uio 0000:81:00.0 0000:81:00.1
    echo 1 > /sys/bus/pci/devices/0000\:81\:00.0/max_vfs
    echo 1 > /sys/bus/pci/devices/0000\:81\:00.1/max_vfs
    
  3. Detach VFs from the host, bind them to pci-stub driver:

    /sbin/modprobe pci-stub
    
    using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 154c",
    
    echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
    echo 0000:81:02.0 > /sys/bus/pci/devices/0000:08:02.0/driver/unbind
    echo 0000:81:02.0 > /sys/bus/pci/drivers/pci-stub/bind
    
    echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
    echo 0000:81:0a.0 > /sys/bus/pci/devices/0000:08:0a.0/driver/unbind
    echo 0000:81:0a.0 > /sys/bus/pci/drivers/pci-stub/bind
    

    or using the following more easy way:

    virsh nodedev-detach pci_0000_81_02_0;
    virsh nodedev-detach pci_0000_81_0a_0;
    
    ./usertools/dpdk-devbind.py -s
    
    0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
    0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
    0000:81:02.0 'XL710/X710 Virtual Function' if= drv=pci-stub unused=
    0000:81:0a.0 'XL710/X710 Virtual Function' if= drv=pci-stub unused=
    

    it can be seen that VFs 81:02.0 & 81:0a.0 ‘s drv is pci-stub.

  4. Start testpmd on host:

    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3e -n 4 -b 0000:81:02.0 -b 0000:81:0a.0 -- -i
    
  5. Passthrough VFs 81:02.0 & 81:0a.0 to vm0, and start vm0:

    /usr/bin/qemu-system-x86_64  -name vm0 -enable-kvm \
    -cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img -vnc :1 \
    -device pci-assign,host=81:02.0,id=pt_0 \
    -device pci-assign,host=81:0a.0,id=pt_1
    
  6. Login vm0, got VFs pci device id in vm0, assume they are 00:06.0 & 00:07.0, bind them to igb_uio driver, and then start testpmd, set it in mac forward mode:

    ./usertools/dpdk-devbind.py --bind=igb_uio 00:06.0 00:07.0
    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x0f -n 4 -a 00:06.0 -a 00:07.0 \
                                             -- -i
    
    testpmd> set fwd mac
    testpmd> start
    
  7. Get mac address of one VF and use it as dest mac, using scapy to send 2000 random packets from tester, verify the packets can be received by one VF and can be forward to another VF correctly.

183.3. Test Case 3: pf dpdk vf reset

183.4. this case pf in dpdk

  1. Got the pci device id of DUT, for example:

    ./usertools/dpdk-devbind.py -s
    
    0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
    0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
    
  2. bind pf to igb_uio and Create 3 VFs from pf0:

    ./usertools/dpdk-devbind.py --bind=igb_uio 0000:81:00.0
    echo 3 > /sys/bus/pci/devices/0000\:81\:00.0/max_vfs
    
  3. Detach VFs from the host, bind them to pci-stub driver:

    /sbin/modprobe pci-stub
    
    using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 154c",
    
    echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
    echo 0000:81:02.0 > /sys/bus/pci/devices/0000:08:02.0/driver/unbind
    echo 0000:81:02.0 > /sys/bus/pci/drivers/pci-stub/bind
    
    echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
    echo 0000:81:02.1 > /sys/bus/pci/devices/0000:08:02.1/driver/unbind
    echo 0000:81:02.1 > /sys/bus/pci/drivers/pci-stub/bind
    
    echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
    echo 0000:81:02.2 > /sys/bus/pci/devices/0000:08:02.2/driver/unbind
    echo 0000:81:02.2 > /sys/bus/pci/drivers/pci-stub/bind
    

    it can be seen that VFs 81:02.0 & 81:02.1 & 81:02.2 ‘s drv is pci-stub.

  4. Start testpmd on host:

    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x600000000006 -n 4 -b 0000:81:02.0 -b 0000:81:02.1 -b 0000:81:02.2 -- -i
    
  5. Passthrough VFs 81:02.0 & 81:02.1 to vm0, and start vm0:

    /usr/bin/qemu-system-x86_64  -name vm0 -enable-kvm \
    -cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img -vnc :1 \
    -device pci-assign,host=81:02.0,id=pt_0 \
    -device pci-assign,host=81:02.1,id=pt_1
    
  6. Passthrough VFs 81:02.2 to vm1, and start vm1:

    /usr/bin/qemu-system-x86_64  -name vm0 -enable-kvm \
    -cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-2.img -vnc :2 \
    -device pci-assign,host=81:02.2,id=pt_0
    
  7. Login vm0 and vm1, got VFs pci device id in vm0 and vm1, assume they are 00:04.0 & 00:05.0 on vm0,00:04.0 on vm1, bind them to igb_uio driver,for vm0:

    ./usertools/dpdk-devbind.py --bind=igb_uio 00:04.0 00:05.0
    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 1  -- -i
    testpmd> set fwd mac
    testpmd> start
    
  8. On vm 1:

    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 1  -- -i
    
  9. On vm0:

    testpmd>clear port stats all
    
  10. Tester loop send packet to vf0 on vm0

  11. On vm1 loop start stop port 1000 times:

    testpmd>port stop all
    testpmd>port start all
    
  12. Tester stop send packet

  13. On vm0,check port stats,verify vf0 vf1 can receive packet ,no error

183.5. Test Case 4: pf kernel vf reset

183.6. this case pf in kernel

  1. Got the pci device id of DUT, for example:

    ./usertools/dpdk-devbind.py -s
    
    0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e unused=
    0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e unused=
    
  2. bind pf to igb_uio and Create 3 VFs from pf0:

    echo 3 > /sys/bus/pci/devices/0000\:81\:00.0/sriov_nums
    
  3. Detach VFs from the host, bind them to pci-stub driver:

    /sbin/modprobe pci-stub
    
    using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 154c",
    
    echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
    echo 0000:81:02.0 > /sys/bus/pci/devices/0000:08:02.0/driver/unbind
    echo 0000:81:02.0 > /sys/bus/pci/drivers/pci-stub/bind
    
    echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
    echo 0000:81:02.1 > /sys/bus/pci/devices/0000:08:02.1/driver/unbind
    echo 0000:81:02.1 > /sys/bus/pci/drivers/pci-stub/bind
    
    echo "8086 154c" > /sys/bus/pci/drivers/pci-stub/new_id
    echo 0000:81:02.2 > /sys/bus/pci/devices/0000:08:02.2/driver/unbind
    echo 0000:81:02.2 > /sys/bus/pci/drivers/pci-stub/bind
    

    it can be seen that VFs 81:02.0 & 81:02.1 & 81:02.2 ‘s drv is pci-stub.

  4. Passthrough VFs 81:02.0 & 81:02.1 to vm0, and start vm0:

    /usr/bin/qemu-system-x86_64  -name vm0 -enable-kvm \
    -cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-1.img -vnc :1 \
    -device pci-assign,host=81:02.0,id=pt_0 \
    -device pci-assign,host=81:02.1,id=pt_1
    
  5. Passthrough VFs 81:02.2 to vm1, and start vm1:

    /usr/bin/qemu-system-x86_64  -name vm0 -enable-kvm \
    -cpu host -smp 4 -m 2048 -drive file=/home/image/sriov-fc20-2.img -vnc :2 \
    -device pci-assign,host=81:02.2,id=pt_0
    
  6. Login vm0 and vm1, got VFs pci device id in vm0 and vm1, assume they are 00:04.0 & 00:05.0 on vm0,00:04.0 on vm1, bind them to igb_uio driver,for vm0:

    ./usertools/dpdk-devbind.py --bind=igb_uio 00:04.0 00:05.0
    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 1  -- -i
    testpmd> set fwd mac
    testpmd> start
    
  7. On vm 1::

    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 1 – -i

  8. On vm0:

    testpmd>clear port stats all
    
  9. Tester loop send packet to vf0 on vm0

  10. On vm1 loop start stop port 1000 times:

    testpmd>port stop all
    testpmd>port start all
    
  11. Tester stop send packet

  12. On vm0,check port stats,verify vf0 vf1 can receive packet ,no error